Ubiquiti UniFi Access Reader Lite

109,-

90,08 Excl. btw

50+ op voorraad

Veilig achteraf betalen via of

Vandaag voor 17:00 besteld, morgen of maandag in huis!

Toevoegen aan winkelwagen Aan verlanglijst toevoegen

The UniFi Access Reader Lite has been designed for convenient use and secure access. The PoE powered reader is easy to install and supports the latest NFC security standards including AES-128 encrypted MIFARE DESFire. Unlocking the door is quick and secur

Vaak samen gekocht.

UniFi Switch Mission Critical

1.023,25

Toevoegen aan winkelwagen
UniFi Access Hub

215,00

Toevoegen aan winkelwagen
UniFi Access Card

52,25

Toevoegen aan winkelwagen

Op ons kun je rekenen.

Gratis verzending binnen de Benelux
Installatieservice kant-en-klaar of op locatie
Kopen op rekening voor de zakelijke markt
Professioneel advies per telefoon
Altijd minimaal 2 jaar garantie^*
Klantbeoordeling 9,2

Mechanical:

Dimensions	94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2")
Weight	67 g (2.4 oz)
Enclosure material	Polycarbonate
Mounting options	Wall-mount, gang box mount* *The UA-Reader Lite must be installed either indoors or under a roof eave outdoors.
Weatherproofing	IP54

Hardware:

Networking interface	10/100 MbE
Max. power consumption	6W
Power method	PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range	44–57V DC
Button	(1) Factory reset
LEDs	White/Blue
Connectivity	Ethernet, BLE 4.1
NFC frequency	13.56 MHz
NFC reading range	<30 mm
NFC standards	ISO 14443A, 14443B, 15693
NFC technology	NFC Tag 1, 2, 3, 4, 5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire
Operating environment	Outdoor use
Ambient operating temperature	-20 to 40° C (-4 to 104° F)
Ambient operating humidity	5 to 90% noncondensing
Software information	The software version of a product can be checked at https://unifi.ui.com
UL 294 level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
UL 294 statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements	Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-Reader Lite, V02