Ubiquiti Pro Max 24 PoE - 400W PoE budget

USW-Pro-Max-24-POE is a 24-port PoE managed switch. The switch is equipped with 8 2.5 Gb/s Ethernet interfaces compatible with PoE++ (802.3bt) and 16 1 Gb/s Ethernet ports (8 ports compatible with PoE 802.3at and 8 compatible with 802.3bt). The total power available for PoE ports is as much as 400W. The manufacturer provides two SFP+ 10 Gb/s interfaces as uplink ports.

In addition to the standard functions for L2 switches, USW-Pro-Max-24-POE also includes support for the Layer 3 function and Etherlighting technology - port illumination enabling quick finding of the port and its speed or native VLAN.

The total non-blocking bandwidth of the switch is 56 Gb/s and the switching capacity is up to 112 Gb/s

Main features:

Etherlighting technology enabling visual verification of the port status and configuration
8x 2.5 Gb/s Ethernet ports with support for PoE++ (IEEE 802.3bt)
16x 1 Gb/s Ethernet ports (8x 802.3bt and 8x 802.3at)
2x 10 Gb/s SFP+ interfaces
possibility of using DC emergency power supply
400W for PoE ports

Mechanical:

Dimensions	442 x 325 x 44 mm (17.4 x 12.8 x 1.7")
Weight:	Without mounting brackets: 5.1 kg (11.3 lb)
	With mounting brackets: 5.2 kg (11.5 lb)
Enclosure material	SGCC steel

Hardware:

Management interface	Ethernet In-Band
Networking interface:	(16) GbE RJ45 ports
	(8) 1/2.5 GbE RJ45 ports
	(2) 10G SFP+ ports
PoE interface:	(8) PoE/PoE+ (Pins 1, 2+; 3, 6-)
	(16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Total non-blocking throughput	56 Gbps
Switching capacity	112 Gbps
Forwarding rate	83.328 Mpps
Power method:	(1) Universal input, 100—240V AC, 50/60 Hz
	(1) USP-RPS DC input
Power supply	AC/DC, internal, 450W
Supported voltage range	100—240V AC
Max. power consumption	50W (Excluding PoE output)
Total available PoE	400W
Max. PoE wattage per port by PSE:	PoE: 15.4W
	PoE+: 30W
	PoE++: 60W
Voltage range PoE mode:	PoE: 44—57V
	PoE+: 50—57V
LCM display	(1) 1.3" touchscreen
Button	Factory reset
Ambient operating temperature	-5 to 40° C (23 to 104° F)
Ambient operating humidity	10 to 90% noncondensing
Certifications	CE, FCC, IC

Switching features:

Layer 2 features:	IGMP snooping
	STP / RSTP with priorities and port-level disable
	Port isolation
	Storm control
	Voice VLAN
	Port mirroring
	LACP port aggregation
	Multicast / broadcast rate limiting
	MAC address blocking
	Flow control
	802.1X control
	Jumbo frames
	Proprietary loop protection
	DHCP snooping / guarding
	Egress rate limit
	LLDP-MED
	Port restricted by MAC
	Device isolation with ACLs
Layer 3 features:	DHCP for locally-managed networks
	DHCP relay
	Inter-VLAN routing between networks on same switch
	Static routing between local networks
	Network isolation with ACLs